买球赛的平台

免费服务热线:+86-13704995315+86-18070817777
English
联系我们
买球赛的平台
7*24小时为您服务

+86-13704995315

+86-18070817777

LGZ全自动刮刀大翻盖下卸料离心机

【主要用途】 广泛用于固相为颗粒状的悬浮液的过滤。 如:石膏,硫酸铜,氯化钾,硼砂,燃料,动植物提取液,农药药剂,食盐,味精,食品添加剂,淀粉,帛糖,化学调味料,抗生素,维生素,铜、锌、铝等矿产物、金属精制,污泥处理,污水处理等。 除一般用途外,平板式特别适用于粘度大、有毒、有害、易燃、易爆等介质的固液分离。 用于制药、食品、化工、国防等工业领域里的原料,中间体及成品的固液分离。

详细介绍
【型号及规格参数】
型号 全自动刮刀平板下部卸料大翻盖离心机 分离因素(w2r/g) 电机功率(kw) 整机重量(kg) 外形尺寸(mm)
直径(mm) 高度(mm) 工作容积(L) 装料限量(kg) 转速(r/min)
LGZ800 800 420 120 160 1300 820 7.5 2400 1700*1250*1650(2050)
LGZ1000 1000 460 180 200 1200 810 11 3500 2000*1500*1880(2400)
LGZ1250 1250 680 420 480 1050 720 22 4500 2350*1800*2335(2900)
LGZ1600 1600 1000 1000 1100 1050 740 37 10000 3000*2200*3000(3900)
 
主要特点
本机为间歇操作、程序控制的过滤式离心机,通过先进的PLC可编程控制器控制,采用变频调速器和刹车制动单位以及液压或气压件组合,单机或主控中心计算机联网。
由液压、电气控制系统自动完成进料、分离、洗涤、脱水、卸料等工序,可实现远距离操作,可广泛应用于含粒度0.05-0.15毫米固相颗粒的悬浮液分离。
无离合器,无刹车瓦,特别适宜热敏感性强,不允许晶粒破碎,操作人员不宜接近的物料分离。完全适用于易燃易爆、有毒、易腐蚀的工业现场。
 
【主要用途】
广泛用于固相为颗粒状的悬浮液的过滤。
如:石膏,硫酸铜,氯化钾,硼砂,燃料,动植物提取液,农药药剂,食盐,味精,食品添加剂,淀粉,帛糖,化学调味料,抗生素,维生素,铜、锌、铝等矿产物、金属精制,污泥处理,污水处理等。
除一般用途外,平板式特别适用于粘度大、有毒、有害、易燃、易爆等介质的固液分离。
用于制药、食品、化工、国防等工业领域里的原料,中间体及成品的固液分离。
 
【工作原理】
平板式下卸料离心机以转鼓为主件,将刮刀驱动,机械传钫,机壳等功能部件模块化设计,使之可以实现多功能任意组合。刮刀驱动有液压、气动、手动等方式。变频启动,电动刹车停机。
电机通过皮带传动带动转鼓绕主轴轴心旋转,形成离心力场。被分离的悬浮液从顶部加料管进入转鼓,落在布料盘上,在离心力的作用下,抛向转鼓壁,液相经转鼓壁上的滤网、滤孔抛向机壳空间,汇集在底盘内,经排液管排出,而固相存留在滤布的内侧。
若需洗涤,则洗涤水通过洗涤管加入洗涤。脱水完毕后,转鼓低速转动,刮刀将固相物刮下来,经转鼓底部出料口卸出。
  
除用途广泛的洁净型以外,可根据企业需求定制碳钢型,衬塑型,衬PE型,钛材型平板式离心机。


 
Full-automatic scraper plate lower discharge large flip cover centrifuge
 
 
 
Specification
Model Full-automatic scraper plate lower discharge large flip cover centrifuge Separation factor(w2r/g) Motor power(kw) Overall weight(kg) External dimensions(mm)
Diameter(mm) Height(mm) Bowl Volume(L) Loading limit(kg) Speed(r/min)
LGZ800 800 420 120 160 1300 820 7.5 2400 1700*1250*1650(2050)
LGZ1000 1000 460 180 200 1200 810 11 3500 2000*1500*1880(2400)
LGZ1250 1250 680 420 480 1050 720 22 4500 2350*1800*2335(2900)
LGZ1600 1600 1000 1000 1100 1050 740 37 10000 3000*2200*3000(3900)
 
 
 
 
 
 
 
Characteristics
This machine is a filtering centrifuge with intermittent operation and program control. It is controlled by an advanced PLC programmable controller. It adopts a combination of variable frequency speed governor, brake and brake units and hydraulic or pneumatic components. The single machine or main control center computer is networked.
The hydraulic and electrical control systems can automatically complete the processes of feeding, separation, washing, dehydration, discharging and the like, can realize long-distance operation, and can be widely applied to the suspension separation containing solid phase particles with particle sizes of 0.05-0.15mm ..
No clutch, no brake pad, especially suitable for separation of materials with strong thermal sensitivity, no grain breakage and unfavorable access for operators.  It is fully applicable to industrial sites that are inflammable, explosive, toxic and corrosive.
 
Applications
Widely used for filtration of suspension with granular solid phase.
Such as gypsum, copper sulfate, potassium chloride, borax, fuel, animal and plant extracts, pesticide agents, salt, monosodium glutamate, food additives, starch, sugar, chemical seasonings, antibiotics, vitamins, minerals such as copper, zinc, aluminum, metal refining, sludge treatment, sewage treatment, etc.
In addition to general use, flat plate is especially suitable for solid-liquid separation of medium with high viscosity, toxic, harmful, flammable, explosive, etc.
Used for solid-liquid separation of raw materials, intermediates and finished products in pharmaceutical, food, chemical, national defense and other industrial fields.
 
Principle】
The flat-plate bottom discharge centrifuge uses a rotating drum as the main component, and modularizes the functional components such as scraper drive, mechanical transmission, casing, etc., so that it can realize multi-function and arbitrary combination.  Scraper is driven by hydraulic, pneumatic and manual methods.  Frequency conversion starts and electric brake stops.
The motor drives the rotating drum to rotate around the axis of the main shaft through belt transmission to form a centrifugal force field.  The separated suspension enters the rotating drum from the top charging pipe and falls on the distributing tray. Under the action of centrifugal force, it is thrown to the wall of the rotating drum. The liquid phase is thrown to the casing space through the filter screen and filter holes on the wall of the rotating drum, collected in the chassis and discharged through the drain pipe, while the solid phase remains inside the filter cloth.
If washing is required, washing water is added into the washing pipe for washing.  After dehydration is completed, the rotating drum rotates at a low speed, the scraper scrapes off the solid phase and discharges it through the discharge port at the bottom of the rotating drum.
 
 
In addition to the widely used clean type, carbon steel type, lining plastic type, PE type, titanium plate centrifuge can be customized according to the needs of enterprises.


TOP